USB MOTION CONTROLLER

SPECIFICATIONS:
- Automatic firmware checking and firmware update.
- Motion control on upto 6-axis (X, Y, Z, A, B, C).
- Configurable maximum stepping frequency, the options are 25kHz(with 20usec pulse length), 50kHz(with 10usec pulse length), 100kHz(with 5usec pulse length).
- On the fly configurable 12 pieces of 5Volt (TTL level) buffered outputs. The current sink/source capability is 20mA max. per output.
- On the fly configurable 5 pieces of 5V (TTL level) schmitt triggered and filtered inputs. The input internal pullup resistance to 5Volts is 4.7kOhms.
- About 1 second long communication buffer.
- 100% LPT port compatible pinout.

- Comes with USB Cable.

We use these Products on our own machines and can offer technical support on all our products.

1.) Product manual

.

2.) UCx00 automatic installer application

.

3.) Plugin for manual installation

.

4.) USB drivers for manual installation

.

5.) Software prerequirements



FEATURES

- Reference inputs.
- E-stop input.
- Softlimits.
- Limit switch inputs.
- Limits override.
- Index input (extended function supports multi slot sensors).
- Spindle speed PWM control output.
- Step and direction spindle control output.
- Spindle and coolant relay control.
- Charge pump safety signal output (configurable to active/inactive when in E-stop).
- Charge pump adjustable frequency (12.50kHz in normal or 5kHz in laser mode).
- All signals configurable to active High/Low.
- General purpose I/O signals handling.
- Offline mode.
- MPG1 and MPG2 support.
- Slave axis.
- Backlash compensation.
- Digit/probe inpu
t.

 

Write a review

Note: HTML is not translated!
    Bad           Good

UC100 USB Motion Controller

  • Product Code: UC100
  • Availability: In Stock
  • £84.99