The CW-885 is a new generation Microstepping controller running smoother and cooler suitable for a wide range of stepping motors with its wide range of settings for both current and micro steps.
DataSheet: CW885 Microstepping Driver
DataSheet: 86HS155-5508-01 12.5Nm Stepper Motor
DataSheet: 86HS115-420 8.7Nm Stepper Motor
DataSheet: CW885 + CP0-10V Pro Wiring Diagram
DataSheet: CW885 + HG08 Wiring Diagram
The CW885 microstepping driver design philosophy is based on advanced digital current control technology, with continuous monitoring of output to give smooth and reliable microstepping. Very versatile input power capability can be used with toroidal or similar transformer directly all internal rectification and smoothing built into CW885, also can be used with Switchmode PSU operating voltage range is 24VAC-60VAC or 34VDC-80VDC maximum and precautions taken not to exceed these values and consideration for input line variations and overvoltage generation by Switchmode PSU’s for current regulation need to be factored in, if in doubt contact Cnc4you technical support. Driver can be used with two-phase or four-phase (wired in series or Parallel) hybrid stepper motors up to 8.5A.
Due to the adoption of the advanced anti-noise sound control method, it can significantly reduce the noise and vibration during operation; it uses full current PWM control method, and features stable operation, low noise, low vibration and low temperature rise of motor. It has 16 levels of microstepping, the maximum number of microsteps is 1/256 (step number is 51200 steps/rev can be useful to reduce vibration). Current range is 1.9A-8.5A, the output current is 8 steps; it has automatic semi-flow, self-test, overvoltage, under-voltage and over-current protection functions built in.
Stepper Motor Driver 8.5A, 24-60VAC or 34-80VDC CNC Microstepping CW885
- Product Code: CW885
- Availability: Out Of Stock