• Stepper Motor Driver 4.5A, 50V CNC Microstepping CW5045

The CW-5045 is a new generation Microstepping controller running smoother and cooler suitable for a wide range of stepping motors with its wide range of settings for both current and micro steps.
This makes it ideal for many applications and with fractional and decimal microstepping allows rounded numbers for both imperial and metric ballscrews and even acme threads, high performance at very low cost.

DataSheet: CW5045 Microstepping Driver
DataSheet: 60BYGH301B 3.1Nm Stepper Motor
DataSheet: 60BYGH401-03 4Nm Stepper Motor
DataSheet: CW5045 Wiring Diagram

The CW-5045 will give you professional results at low cost allowing better control and power output from your chosen stepper especially compared to cheap multi axis cards using simple but low quality and reliability.

Product Description
The CW-5045 is a high performance microstepping chopper Driver with small size therefore small enclosure footprint is achievable. Advanced protection circuit built in as standard please see data sheet below.

All inputs are optically isolated giving further protection in isolating driver from control electronics and helps with noise immunity.
Power saving function for lower power consumption can be turned on by a simple switch saving your motors in long term idle conditions.

Write a review

Note: HTML is not translated!
    Bad           Good

Stepper Motor Driver 4.5A, 50V CNC Microstepping CW5045

  • Product Code: CW5045
  • Availability: In Stock
  • £38.63


Related Products

400W PSU 36V 11A CNC Power Supply Stepper Motor

400W PSU 36V 11A CNC Power Supply Stepper Motor

High Power High Quality Switch mode Power supply made to pair with our CW-5045 Microstepping..

£39.97

Breakout board CNC Stepper Motor 5 Axis Relay HG08

Breakout board CNC Stepper Motor 5 Axis Relay HG08

5 axis breakout board MACH KCAM4 EMC2 driver interface adapter HG08 Version change to allow dr..

£38.63

Stepper Motor 1.5Nm Nema23

Stepper Motor 1.5Nm Nema23

Nema 23 1.5Nm High torque Stepper Motor 1.8 Deg, Single shaft DataSheet: 57HS64-3008 1...

£19.53

Stepper Motor 2.2Nm Nema23

Stepper Motor 2.2Nm Nema23

Nema23 2.2Nm High torque Stepper Motor 1.8 Deg, Double shaft DataSheet: 57HS82-3008B 2.2Nm S..

£21.31

Stepper Motor 3.1Nm Nema23

Stepper Motor 3.1Nm Nema23

Nema 23 3.1Nm High torque Stepper Motor 1.8 Deg, Dual shaft Colour change specification as before. ..

£24.12

Stepper Motor 4Nm Nema23

Stepper Motor 4Nm Nema23

Very High performance Nema23 4Nm Stepper Motor Checkout Video below to see capability of high q..

£34.63

Breakout board KK01 CNC Stepper Motor 5 Axis with Relay

Breakout board KK01 CNC Stepper Motor 5 Axis with Relay

5 axis breakout board MACH KCAM4 EMC2 driver interface adapter KK01 Description: 1. Connecti..

£28.99

Breakout board CP0-10V CNC 4 Axis with Charge Pump and Relay

Breakout board CP0-10V CNC 4 Axis with Charge Pump and Relay

Our CP0-10V breakout board is a 4 Axis system board with built in Charge Pump circuit and 0-10Vo..

£49.99