Nema 23 4.5Nm Highest Torque Stepper for Z Axis and 4Nm standard 8 wire steppers for X and Y Axis.
This kit is suitable for MM32L Milling Machine retrofitted with our hardware ballscrew kit, also suitable for similar sized machines using the Nema 23 size motors.

This Kit contains the following matched parts for your CNC project. Pictures are for guidance only please check product info below as individual components may vary. If adding further stepper motor and driver please make sure same parts are used as high inductance third party steppers can cause damage to driver running at 48Volts, so only use same products CWD556.

Individual detailed descriptions can be found for each Product

1 x 4 Axis Breakout Board with 0-10V Output
1 x Nema 23 4.5Nm Stepper Motors

2 x Nema 23 4Nm Stepper Motor
3 x CWD556 Microstepping Drivers
1 x 480Watt PSU 48Volts
1 x NVR Switch
3 x Proximity Switches

1 x 15V or 24V PSU

1 x Panel Mount Filter 10A

1 x Terminal Block 

Optional Extra: we would recommend using our UC400 Motion Controller with this kit, allowing use of modern PC’s and laptops with Ethernet connection.

DataSheet: STD Wiring Diagram
DataSheet: 4.5Nm-Stepper-Motor

DataSheet: 4Nm-Stepper-Motor
DataSheet: CWD556 Digital Microstepping Driver
DataSheet: Breakout Board CP0-10V

Write a review

Please login or register to review

STD Retrofit Kit 3 Axis

  • Product Code: STD-3-Axis
  • Availability: In Stock
  • £453.97